They had untouchable market dominance from the mid 80’s through the mid 2010’s, so probably closer to 30 years.
AMD and Apple caught up on consumer PC processors, as the consumer PC market as a whole kinda started to fall behind tablets and phones as the preferred method of computing. Even in the data center, the importance of the CPU has lost ground to GPU and AI chips in the past 5 years, too. We’ll see how Intel protects its current position in the data center.
The competition for CPUs can be AMD vs ARM vs RISC-V. It doesn’t have to be between two x86 giants.
That’s better, not necessarily for instruction set reasons, but because ARM and RISC-V are more open to multiple companies stepping in to produce chips.
I’m personally excited about the actual engineering challenges that come next and think that all 3 big foundries have roughly equal probability of coming out on top in the next stage, as the transistors become more complex three dimensional structures, and as the companies try to deliver power from the back side of the wafer rather than the crowded front side.
Samsung and Intel have always struggled with manufacturing finFETs with the yields/performance of TSMC. Intel’s struggles to move on from 14nm led to some fun memes, but also reflected the fact that they hit a plateau they couldn’t get around. Samsung and Intel have been eager to get off of the finFET paradigm and tried to jump early to Gate All Around FETs (GAAFETs, which Samsung calls MBCFET and Intel calls RibbonFET), while TSMC sticks around on finFET for another generation.
Samsung switched to GAAFET for its 3nm node, which began production in 2022, but the reports are that it took a while to get yields up to an acceptable level. Intel introduced GAAFET in its 20A node, but basically abandoned it before commercial production and put all of its resources into 18A, which they last reported should be ready for mass production in the first half of 2025 and will be ready for external customers to start taping out their own designs.
Meanwhile, TSMC’s 3nm node is still all finFET. Basically the end of the line for this technology that catapulted TSMC way ahead of its peers. Its 2nm node will be the first TSMC node to use GAAFET, and they have quietly abandoned plans to introduce backside power in the generation after that, for their N2P. Their 1.6 nm node is going to have backside power, though. They’ll be the last to marker with these two technologies, but maybe they’re going to release a more polished process that still produces better results.
So you have the three competitors, with Samsung being the first to market, Intel likely being second, and TSMC being third, but with no guarantees that they’ll all solve the next generation challenges in the same amount of lead time. It’s a new season, and although past success does show some advantages and disadvantages that may still be there, none of it is a guarantee that the leader right now will remain a leader into the next few generations.
I hope Intel gets their act together soon. We can’t have a monopoly on chips on the CPU or GPU space.
It’s baffling how fast they fell, since they had a monopoly for ~20 years.
They had untouchable market dominance from the mid 80’s through the mid 2010’s, so probably closer to 30 years.
AMD and Apple caught up on consumer PC processors, as the consumer PC market as a whole kinda started to fall behind tablets and phones as the preferred method of computing. Even in the data center, the importance of the CPU has lost ground to GPU and AI chips in the past 5 years, too. We’ll see how Intel protects its current position in the data center.
Especially one just a small naval visit from China.
The competition for CPUs can be AMD vs ARM vs RISC-V. It doesn’t have to be between two x86 giants.
That’s better, not necessarily for instruction set reasons, but because ARM and RISC-V are more open to multiple companies stepping in to produce chips.
Eh, a lot of big players have backed off from custom ARM CPU cores. So the question is how many even have the muscle to compete?
Double so for RISC-V.
I’m personally excited about the actual engineering challenges that come next and think that all 3 big foundries have roughly equal probability of coming out on top in the next stage, as the transistors become more complex three dimensional structures, and as the companies try to deliver power from the back side of the wafer rather than the crowded front side.
Samsung and Intel have always struggled with manufacturing finFETs with the yields/performance of TSMC. Intel’s struggles to move on from 14nm led to some fun memes, but also reflected the fact that they hit a plateau they couldn’t get around. Samsung and Intel have been eager to get off of the finFET paradigm and tried to jump early to Gate All Around FETs (GAAFETs, which Samsung calls MBCFET and Intel calls RibbonFET), while TSMC sticks around on finFET for another generation.
Samsung switched to GAAFET for its 3nm node, which began production in 2022, but the reports are that it took a while to get yields up to an acceptable level. Intel introduced GAAFET in its 20A node, but basically abandoned it before commercial production and put all of its resources into 18A, which they last reported should be ready for mass production in the first half of 2025 and will be ready for external customers to start taping out their own designs.
Meanwhile, TSMC’s 3nm node is still all finFET. Basically the end of the line for this technology that catapulted TSMC way ahead of its peers. Its 2nm node will be the first TSMC node to use GAAFET, and they have quietly abandoned plans to introduce backside power in the generation after that, for their N2P. Their 1.6 nm node is going to have backside power, though. They’ll be the last to marker with these two technologies, but maybe they’re going to release a more polished process that still produces better results.
So you have the three competitors, with Samsung being the first to market, Intel likely being second, and TSMC being third, but with no guarantees that they’ll all solve the next generation challenges in the same amount of lead time. It’s a new season, and although past success does show some advantages and disadvantages that may still be there, none of it is a guarantee that the leader right now will remain a leader into the next few generations.
Packaging/interconnect tech is starting to be a big factor though, and TSMC is very strong in this area, no? They can lean on that.
Also its weird to even imagine Intel with big external customers…